Easy Dollar Tree Bunny Wreath for Easter
There’s no reason to by new decor for the spring when you can make your own DIY crafts at home. And if you’re on a budget, you can’t go wrong with dollar store supplies! When you make this simple Dollar Tree bunny wreath, you can create an adorable Easter decoration to hang on your front door. All you need are a few simple supplies to put together this easy budget-friendly project today!
This posts contains affiliate links, which means I may earn a commission if you purchase something from my link (at no additional cost to you). Thanks for your support!

You won’t believe how simple this adorable Easter bunny wreath is to make! And since it’s made with dollar store supplies, it’s cheap, too!
But the best part about this simple Easter craft is that you can put it together in minutes! That means you’ll have an adorable decoration for your front porch by the end of the day today.
Dollar Tree Bunny Wreath
You can grab everything you need to make this cute Easter bunny wreath at Dollar Tree! Just check out the seasonal section of your store to find tons of cute Easter craft supplies.

To make your own wood bead Easter bunny wreath, you’ll need a few simple supplies, including:
- Wooden beads. I found these cute pastel colored wood beads in the Easter section of the store. I needed around 2 packages of beads to make the ears on this wreath, but I didn’t use them all!
- Bunny wreath form. To create the shape of my bunny wreath, I grabbed a wire bunny wreath form from the seasonal section of Dollar Tree.
- Ribbon. You’ll need two types of ribbon for your wreath — a solid color to wrap the base of the wreath form and a patterned ribbon to make the bow. I got both from Dollar Tree, although the buffalo plaid was leftover from my Christmas supplies.
- Wire cutters. To thread the beads onto the wreath form, I had to raid my husband’s toolbox and borrow his wire cutters. You’ll need heavy duty wire cutters to cut the form for this craft.
- Hot glue gun. You’ll also need your trusty hot glue gun to hold the beads in place on your bunny wreath!
How to Make a Dollar Tree Bunny Wreath
If you’re wondering how to create this cute Easter wreath to hang on your front door, you’re in luck! All you have to do is follow these simple steps to create this bunny craft at home right now.

Start by using your wire cutters to cut the bottom side of each bunny ear. I suggest cutting the outside connections because it’s easier to thread the beads on from that side.

After that, stretch the ear out slightly to straighten out the point of the ear. This will help the beads slide over the top of the ear more easily. Then, thread the beads onto the ear.
It’s a good idea to flip the wreath form upside down after you get the beads past the top point of the ear or they’ll keep falling off!

Once all the beads are threaded onto the bunny ear, you’ll have to tackle the most difficult part of the craft — attaching the bottom of the ear back to the wreath form. Squirt a liberal amount of hot glue into the hole of the last bead and thread it onto the end of the wire. Then, press the bead into the small piece of wire sticking out of the wreath form. You’ll need to hold the pieces together until the glue dries.
After that, just repeat the process on the other bunny ear.

Once you’re sure the glue is completely dry on your bunny ears, you can start wrapping the ribbon around the bottom part of the wreath form. Start by gluing the end of your ribbon in place.
After that, tightly wrap the ribbon all the way around the wreath form. Once you get to the top of the wreath around the ears, you won’t be able to wrap as tightly. Just make sure all the wire pieces are covered. Don’t worry if it looks messy! You’ll add a bow to cover the ugly part in the next step!

Once you have the wreath completely wrapped, grab your patterned ribbon and tie a big bow. Then, glue the bow to the front of the wreath, right under the spot where the two ears meet. This will help cover the top of the wreath were the ribbon doesn’t look as nice!
How to Hang a Bunny Wreath
If you’re wondering how to hang your wreath on your door after you’re finished making it, you have a few different options! One simple way to hang the wreath is to hammer a nail into the door and hang the hook on top. But if you don’t want to damage your door, you could also try these damage-free hanging options:
Once you figure out what type of door hanger you’ll use, you’ll also need to add a loop of ribbon or twine to the back of the wreath for hanging. Just hot glue the ends of the loop to the back of the wreath and let the glue dry completely before hanging it on your door!
Dollar Tree Easter Bunny Wreath Ideas
See how easy it is to make your own Easter bunny wreath? And once you’re finished putting this cute Dollar Tree craft together, you can use your wreath to decorate with your home! Try these crafting ideas to create your own amazing Easter wreath at home.

This simple farmhouse Easter craft can be customized in so many different ways! As you’re putting your own wreath together, try these other Dollar Tree Easter crafting ideas!
- Decorate with flowers. Give your Easter wreath a spring look with the help of some flowers from the floral section at the dollar store. You can add some sprigs around your bow to add a pop of color to the finished decoration.
- Add some Easter eggs. Another fun way to add an Easter look to your bunny wreath is with Easter eggs. Grab some cute eggs from the dollar store to decorate the area around your bow.
- Make it fuzzy. Give your Easter wreath some texture by using fluffy ribbon to wrap the base of your wreath form.
- Use neutral colors. Instead of adding pastel wood beads to the ears of your bunny, check the craft aisle for natural wood beads. After that, you can create a neutral farmhouse wreath to add to the rest of your boho decor.
Easter Bunny Wreath Craft
Grab a wire wreath form from the dollar store to make this adorable farmhouse style Dollar Tree bunny wreath for Easter decorating.
Materials
- Wire bunny wreath form
- Wood beads
- Blue ribbon
- Buffalo plaid ribbon
Tools
- Wire cutters
- Hot glue gun
- Scissors
Instructions
- Use the wire cutters to cut the bottom side of each bunny ear.
- Thread the beads onto each ear and secure the wreath form back together by adding glue to the inside of the bottom bead. Hold the bead in place until the glue dries.
- Wrap the round part of the wreath form tightly with blue ribbon, securing each end in place with glue.
- Tie a bow with the buffalo check ribbon and glue it in place on the top of the wreath.
More Easy Craft Ideas:
Free Easter SVGs for All Your Spring Crafts
Spring Themed DIY Framed Dot Art
Cute Easter Jar With Dollar Tree Supplies
Homemade Easter Bunny Hot Chocolate Bombs
If you like this post, you’ll probably like these:
Emily is a midwestern mom of two boys. She loves all things DIY — from home renovations to kids birthday party planning. Whether she’s making a new farmhouse craft for her home or helping her kids with a cool activity, you can bet she’s in the middle of some kind of DIY project (or three) right now!




This wreath is so cute. Congratulations, you are being featured on HIH. I hope you stop by. https://www.eclecticredbarn.com/2024/03/easter-decor-on-happiness-is-homemade.html
Hugs,
Bev
Thanks so much for the feature!
This is so cute and am featuring when my party opens!
Thanks so much for the feature!
Aww… this bunny is so cute, Emily!
Thank you for sharing at Create, Bake, Grow & Gather this week. I’m delighted to be featuring your bunny wreath at tomorrow’s party and pinning too.
Thanks so much for the feature!
Emily this is so cute! Love this.
Thanks so much for sharing with Sweet Tea & Friends this month dear friend.
Emily this is so cute! Love this.
Thanks so much for sharing with Sweet Tea & Friends this month dear friend.